  |
| home > storefront > addtronic cases > 6896-120-60 Hotrod Upgrade II |
| 6896-120-60 Hotrod - with fans, NO PS -- This package is the buyer who has a PS but needs the case fans. In addition to the bare case mods--punches, grommets, louver removal--it also has 5.25 drive column cutouts done to provide better airflow on the 5.25 drives. A 3HD hanger is added to the package.
Save about $23.00 over the "old" e-mail ordering of this package. As set up, the case has about 147 cfm intake and about 120 cfm exhaust, assuming a PS airflow of about 28-30 cfm. Warranty, one year. Shipping weight, 37 lbs. |
||
 |
|
|
| CASE: | ||
| 6896-120-60 | ||
| INCLUDED ADDTRONICS ACCESSORIES: | ||
| 5.25>3.5 adapter |
||
| CPU Fan bracket | ||
| 3 HD hanger | ||
| 2 HD hanger |
||
| Addtronics parts kit (I/O panels, motherboard hardware, misc. case and hardware screws) |
||
| MODIFICATIONS: | ||
| LF: P&D 120 (remove Lower Front 120x25 fan cage, punch out factory 120 grill with 120, drill fan mounting holes) |
||
| HD: P&D 120 (remove Hard Drive 80 fan cage, punch out factory 80 grill with 120, drill fan mounting holes) |
||
| BBd: P60 (punch out Backboard fan chassis grill) |
||
| UB: louver removal ('dremel out' louvers in floor of the Upper Back 5.25 HD mount) |
||
| DC: C&D 2 - 90 (remove fan cages on drive column, open column, drill two sets of 90 fan mounting holes) |
||
| 3 - grommet mounts (overdrill fan mounting holes and install rubber grommets at LF, HD, and BBd fan mounts) |
||
| POWER SUPPLY | ||
| none |
||
| FANS | ||
| LF 120: P120M1A/4 - Panaflo 120mm fan, medium speed - 86.5 cfm, 35 dBA. | ||
| HD 120: J120L1A/4 - JMC 1225L (our special order one) - 61 cfm, 26 dBA | ||
| BBd 60: P60M1A - Panaflo 60mm fan, medium speed - 17 cfm, 28 dBA | ||
| DC92 (two): none | ||
| UB: TT-900 - twin 90 exhaust fans est'd 70-plus cfm, 27 dBA |
||
| INCLUDED coolcases.com ACCESSORIES: | ||
| two - FG120 (120 mm. fan guards, on inside of Lower Front and HD intake fans) | ||
| two - FG60 (60 mm. fan guards, on outside and inside of Backboard exhaust fan | ||
| coolcases.com finishing kit (5.25 'Y' adapter, cable ties in two sizes, cable tie stick-on bases) | ||
| SHIPPING: 37 lbs | ||