  |
| home > storefront > addtronic cases > 7896-120-90 Hotrod - with fans, no PS |
| 7896-120-90 Hotrod
- with fans, no PS -- While
coolcases concentrates on developing and building extreme
cases that utilitize low-noise fans, we thought we should
showcase one of the real maxed-out Hot Rods. Not only is a
TT-900 installed, but we also increased the intake by
installing drive column 90s and put in
a Left Side-PCI 120 exhaust as well. No,
that's not a blowhole--why fight the airflow and get dust
and dirt in the case? The result is a case
that has maximum circulation.
For this selction, the modifications are completed, the TT-900 is in place, and a selection of Panaflo and JMC low- and mid-speed fans, filters and guards are installed. All you have to do is put in your own PS. Or, go to the storefront and select the PS you want to install, finish the order, and tell us to set up the case--we'll do the installation for you, as well as give you a system discount. As you can imagine, the cooling design of this big a case with this many fan mounts can vary almost infinitely. This version is set up a very serious overclocker who also needs a lot of cooling for the 5.25 external drives and devices. So, if you want a HotRod set up a bit differently from this one, just e-mail us and tell us what configuration to build for you. |
||
 |
|
|
| CASE: | ||
| 7896-120-90 | ||
| INCLUDED ADDTRONICS ACCESSORIES: | ||
| 5.25>3.5
adapter |
||
| CPU fan bracket |
||
| 2 HD
hanger |
||
| Addtronics
parts kit |
||
| MODIFICATIONS: | ||
| LF: P&D 120 |
(remove lower front factory fan and cage, punch 120, drill mtg. holes) | |
| HD: P&D 120 |
(remove hard drive factory fan cage, punch 120, drill mtg. holes) | |
| DC:
C&D 4 - DC90. |
(rremove two cages on 5.25 drive column, open fan area, drill two 92 fan mounts) | |
| LS-PCI: P&D 120 |
(punch a 120 and drill mtg. holes on the left rear side by PCI slots) | |
| BBd:
P92 |
(remove backboard factory fan mount, punch 92) | |
| APS:
P&D 92 |
(remove Above-PS fan cage, punch 92, drill mounting holes) | |
| UB: louver remov. |
(remove louvers in floor under the Upper Back 5.25 drive mount) | |
| 5
grommet mounts |
(overdrill mtg. holes, install grommets at Lower Front, Hard Drive, Left Side, AbovePS & Backboard fan mounts) | |
| POWER SUPPLY | ||
| None |
(by owner, or from the PS section here) | |
| FANS | ||
| LF: P120M1A/4/FG |
(Panaflo 120 Medium speed, c/w guard - 86.5 cfm, 35.5 dBA) - intake | |
| HD: J120L/4/FG |
(JMC 120x25 Low speed, c/w guard - 61cfm, 26 dBA) - intake | |
| DC:
2 - P92M1A/4/MMF |
(Panaflo 92 Medium speed, c/w filters - 48 cfm, 30 dBA) - both intake | |
| LS-PCI: J120/4/2FG |
(JMC 120x25 Low speed, c/w two guards -61 cfm, 26 dBA) - exhaust | |
| BBd:
P92L1A/4/2FG |
(Panaflo 92 Low speed, c/w two guards - 43 cfm, 35.5 dBA) - exhaust | |
| APS:
P92L1A/4/2FG |
(Panaflo 92 Low Speed, c/w two guards - 43 cfm, 35.5 dBA) - exhaust | |
| UB: TT-900 |
(Just Cooler TT-900 dual exhaust box - 70 cfm, 27 dBA) - exhaust | |
| coolcases.com INCLUDED ACCESSORIES: | ||
| second
- 2HD hanger: |
(until the 3HD hangers are available again) | |
| coolcases.com finishing kit | (5.25 'Y' adapter, cable ties in two sizes, cable tie stick-on bases) | |
| SHIPPING: 39 lbs | ||