home > storefront > chenbro > net mods 2

NET SR103 mods 2: -- Since there are so many variables for modification and PS selection for these cases, we've chosen one here that most buyers interested in a quiet Workstation get. The factory fans, plastic fan mounts, are removed, and the Long Card Holder rivets are drilled out and the holder reinstalled with self-tapping screws. A dual 120 mount is punched on the left front, and a 120 mount for exhaust is installed on the Left Side panel by the PCI slots. All fan mounts--seven of them--are grommeted, Fans used are: two JMC 1225Ls in the Left Front, one JMC 1225L in the Left Side, one P60M1A in the Left Rear, one P80L1A in a Right Front EMI filter / fan mount, and a P90L1A in the right rear HD mount. Fan guards are installed on the left compartment fans, and a metal mesh filter installed on the right front 80. The intake air flow is about 146 cfm, and the exhaust airflow is about 121.
CASE:	Click Images for Enlargements
1 - NET SR103 207 (beige) 107 (black)
MODIFICATIONS:
LF: Punch, Drill, & Trim two 120
RF: Punch & Trim three 80
LS-PCI: Punch, Drill, & Trim120
8 - grommet mounts
install 3.5/4-pot controller
install 8 long leads to controller
hook up 8 leads--four zones
POWER SUPPLY:
1 Enh300
1 Enh0246B
1 Enh converter
FANS:
LF: 2 P120L1A/U
RF: 3 P80M1A/U
LS-PCI:1 E12FAB/3
LR: 1 P60H1A/U
RR: 1 P90M1A/U
INSTALLED PARTS & ACCESSORIES:
8 grommet sets
12 PH screw  sets
8 l.f. trim
4 FG120
1 FG60
3 MMF80s
1 3.5/4-pot controller
8 long fan leads
INCLUDED ACCESSORIES:
coolcases.com finishing kit
SHIPPING: 50 lbs UPS ground, oversized