  |
| home > storefront > chenbro > genie upgrade |
| Genie SR104 upgrade: -- To the factory-pack case we've added a Skyhawk 300w PS, removed one OEM 90 fan, and installed Evercool 120 fans in the lower front and backboard mounts. The intake should be about 90 cfm, and the exhaust about 160 cfm, for a total flow-through of about 250 cfm | ||
 |
|
|
| CASE: | ||
| GENIE SR10403 | ||
| INCLUDED CHENBRO ACCESSORIES: | ||
| lower front fan guard with Long Card Holder attached riveted in place | ||
| factory
fan |
||
| Chenbro
parts kit (I/O panel, manual, motherboard hardware, four 5.25 bezel
blanks, two 3.5 bezel blank) |
||
| MODIFICATIONS: | ||
| None |
||
| POWER SUPPLY | ||
| SH300
(SkyHawk 300w PS, AMD & P4 approved. |
||
| FANS: | ||
| Lower
Front: one Evercool 120 mm. with four-pin connector. |
||
| BackBoard: one Evercool 120 mm. with four-pin connector. | ||
| HD
Exhaust:
one OEM 90 with four-pin power connector |
||
| coolcases.com INCLUDED ACCESSORIES: | ||
| FG120 (fan guard for the backboard fan) | ||
| coolcases.com
finishing kit
(5.25 'Y' adapter, cable ties in two sizes, cable tie
stick-on bases) |
||
| SHIPPING WEIGHT: 38 lbs | ||