Compucase LX-6A19
| CCLXA6-M1-FKFF-A03 | NO PS. LF 120 and BBd 120 chassis grills punched, trimmed, and mounting grommets; Globe (factory) fans reinstalled with an Enermax A03-controller installed and detail-wired. |
|
COMMENTS: Want additional fan control and I/O? In this package, we've added an Enermax A03-FATR2 fan controller to the Globe fan package. The A03 controller is installed in the lower 3.5 floppy bay. It provides I/O (USB 2.0, Audio In & Out) and two pots, LED readouts, and fan speed alarms. The fan controls are programmable. Combining this controller with the Globe fans provides for complete flexibility--you can 'influence' the Globe fans by the remote thermistor location, and then control the actual fan speed from the fan controller! |
|
| 1- LX-6A19 - beige or black: | (case, NO PS, two Global t-c fans, remov. 3.5 cage, 5-HD Rack,
HD rubber mtg. grommets, front filter, front I/O with USB 2.0,
parts kit) |
| MODIFICATIONS: | |
 LF: P, D, & T 120 |
(punch lower front 120 grill, drill 120 mtg holes, trim) |
| BBd: P, D, & T 120 |
(punch lower front 120 grill, drill 120 mtg holes, trim) |
| 2 - grommet mounts |
(overdrill & install grommets on two fan mounts) |
| LS door trim |
(Trim back flange of left side door to clear BBd 120 grommets) |
| Install A03 ctlr |
(install Enermax A03-FATR2 controller) |
| controller hookup--two fans |
(detail-wire two fan leads to controller, hookup) |
| POWER SUPPLY | none |
| FANS: | |
| LF: 1-G120/3t-c |
(Global 120x25 var. sp.fan with remote thermistor--34-64 cfm, 34 dBA) |
| BBd: 1-G120/3t-c |
(Global 120x25 var. sp.fan with remote thermistor--34-64 cfm, 34 dBA) |
| INSTALLED PARTS & ACC'S. | |
| 2 - grommet sets |
fan mounting grommets, set of four |
| 2.5 l.f. - u-channel trim |
punch trim |
| 4 - screw sets |
fan, fan acc. mtg. screws |
| 3 - FG120 |
fan guard, 120 mm - LF inside, BBd inside & outside |
| 1 - A03-FATR2 ctlr |
Enermax I/O and 2-pot, 3.5" fan ctlr, c/w USB2.0, audio, LED & alarms |
| 3 - 3-pin extensions |
3-pin extension leads for fan hookup |
| INCLUDED ACCESSORIES: | |
| 1 - finishing kit |
(25 cable ties, 10 stick-on cable tie bases) |
| SHIPPING WEIGHT: 26 lbs | |
POWER SUPPLY OPTIONS:
1. Purchase the SPI350-120 (Forton Source / Sparkle Power no. SP350-60PN) with automatic fan control for $5.00 less than the storefront price when you buy one of the modified cases.
2. Want more power? Get the TT-420SS for $5.00 less, or step up to the Enermax 465FCA and take $5.00 off. Any PS will receive an additional discount when purchased with our cases. Further, it will be installed and/or shipped with the case, as one package, thus saving you shipping expenses.
CUSTOM CONFIGURATIONS: Want a variation on these storefront configurations? Just tell us in the "comments" field in the order, and we'll reply promptly with the adjusted configuration. For more information or special requests, just e-mail-- jfh@coolcases.com
Coolcases Home