Compucase LX-6A19
| CCLXA6-M2-FKnone | "BAREBONES"-- MODS 1, plus a right side-mid level 92 punch, trim & grommets; NO fans and NO fan guards. |
|
The Right-side filter detail varies slightly, depending on the case color: For the beige cases, a chrome fan guard is installed on the outside, the metal mesh filter in installed inside, next to the panel, and another chrome fan guard is installed on the inside of the fan. For the black case, a black plastic mesh filter is installed on the outside. The beige detail still allows vacuum cleaning of the filter, but will require disassembly for washing. The black detail allows easy filter cleaning by snapping off the cover for filter access, or by vacuuming. If you prefer the chrome guard detail on the black case, just put a note in the 'comments' field during the ordering process. We'll adjust the invoice accordingly. |
|
| CASE: (pictures here show fans in place, which are NOT included in this configuration) | |
| 1- LX-A619 - beige or black: | (case, NO PS, two Global t-c fans, remov. 3.5 cage, 5-HD Rack,
HD rubber mtg. grommets, front filter, front I/O, parts kit) |
| MODIFICATIONS: | |
 LF: P, D, & T 120 |
(punch lower front 120 grill, drill 120 mtg holes, trim) |
| BBd: P, D, & T 120 |
(punch lower front 120 grill, drill 120 mtg holes, trim) |
| |
(punch right-side 90 by ext 3.5 bys, drill 90 mtg holes, trim) |
| 2 or 3 - grommet mounts |
(overdrill & install grommets on two fan mounts) |
| POWER SUPPLY | none |
| FANS: | |
| |
remove both factory fans |
| LF: |
none |
| |
none |
| BBd: |
none |
| INSTALLED PARTS & ACC'S. | |
| 2 or 3 - grommet sets |
fan mounting grommets, set of four |
| 2.5 or 3.5 l.f. - punch trim
|
u-channel punch trim, per lineal foot |
| 1 - screw sets |
RS-M filter mounting screws |
| |
Plastic (black) or metal mesh filter for right-side 90 intake fan |
| INCLUDED ACCESSORIES: | |
| 2 - screw sets |
(8 - XL fan mounting screws for grommet installation) |
| 1 - finishing kit |
(25 cable ties, 10 stick-on cable tie bases) |
| SHIPPING WEIGHT: 24 lbs | |
COMMENTS:
Adding the right side-middle intake fan mount is probably the
most important "upgrade" for increased cooling performance
in this case. It provides for much better airflow, dispersing
air throughout the motherboard area but particularly at the
memory- CPU-HS-HS fan area. We're able to regularly offer a
barebones package for this configuration now--so if you want
one, you can now get it on-line.POWER SUPPLY OPTIONS:
1. Purchase the SPI350-120 (Forton Source / Sparkle Power no. SP350-60PN) with automatic fan control for $5.00 less than the storefront price when you buy one of the modified cases.
2. Want more power? Get the TT-420SS for $5.00 less, or step up to the Enermax 465FCA and take $5.00 off. Any PS will receive an additional discount when purchased with our cases. Further, it will be installed and/or shipped with the case, as one package, thus saving you shipping expenses.
CUSTOM CONFIGURATIONS: Want a variation on these storefront configurations? Just tell us in the "comments" field in the order, and we'll reply promptly with the adjusted configuration. For more information or special requests, just e-mail-- jfh@coolcases.com
Coolcases Home