Compucase LX-6A19
| CCLXA6M2-FKJP-C4/3.5 | MODS 2, plus a right side-mid level 92 punch, trim & grommets; JMC and Panaflo fans, fan accessories; Mitron 4-pot/3.5 controller installed and detail-wired. |
COMMENTS: The best of all worlds! The four-pot controller allows each fan to be adjusted--but equally important, you can now have the benefit of high airflow when you need it, or low and much quieter operation at other times. In a MODs2 installation, one pot controls each fan--leaving a 4th pot to use for the HS fan, AGU, or for lighting, etc...and a 3-pin lead is included for it.
. This is a complete and detail-wired installation: leads are run from each fan similar to the traces on a PCB, and secured at numerous locations with stick-on cable ties, then routed to the controller. fan or controller connectors are soldered on as needed, and color-matched shrinkwrap is used to protect all soldered connections.All connections except for the optional CPU fan hookup are made--that's for you to decide to use. Since the stick-on cable tie bases allow replacement or additional cable ties to be placed, this wiring harness provides and excellent beginning to you building a fully-detailed system.
|
|
| CASE: | |
| 1- D8000-beige or black: | (case, NO PS, two Global t-c fans, remov. 3.5 cage, 5-HD Rack,
HD rubber mtg. grommets, front filter, front I/O, parts kit) |
| MODIFICATIONS: | |
 LF: P, D, & T 120 |
(punch lower front 120 grill, drill 120 mtg holes, trim) |
| BBd: P, D, & T 120 |
(punch lower front 120 grill, drill 120 mtg holes, trim) |
| RS-M: P & D 120 |
(punch right-side 90 by ext 3.5 bys, drill 90 mtg holes, trim as needed) |
| 2 or 3 - grommet mounts | (overdrill & install grommets on two fan mounts) |
| install 4-pot 3.5 bay ctlr |
(install silver, blue, or black four-pot controller-13 w./pot.) |
| hook up 3 case fans to ctlr |
(install 3-pin fan leads to controller; hook up CPU fan lead to 4th pot) |
| POWER SUPPLY | none |
| FANS: | |
| credit memo factory fans |
remove both factory fans |
| LF: 1-J120L/U | (JMC 120x25 spec. low noise, remove tail; @ 12v - 61 cfm, 26 dBA) |
| RS-M: 1-P90L1A/U |
(Panaflo 90, low speed, untailed; @ 12v - 43 cfm, 27.7 dBA |
| BBd: 1-P120L1A/4-7 |
(Panaflo 120x38 low speed, untailed; @ 12v - 69 cfm, 30 dBA) |
| INSTALLED PARTS & ACC'S. | |
 2
or 3 - grommet sets |
fan mounting grommets, set of four |
| 2.5
or 3.5 l.f. - punch trim |
u-channel punch trim, per lineal foot |
| 6
- screw sets |
fan, fan acc. mtg. screws |
| 1 - PMF or MMF90 |
Plastic (black) or metal mesh filter for right-side 90 intake fan |
| 1 or 2 - FG90 |
fan guard(s), 90 mm - RS-M outside (beige) and inside for RS-M fan |
| 3 - FG120 |
fan guard, 120 mm - LF inside, BBd inside & outside |
| 1 - 4-pot ctlr |
3.5 bay, 4-pot controller - silver in beige case, blue or black in black case |
| 1
- 4-lead fan harness |
fabricate and install wiring harness for three case fans, one CPU fan (opt.) |
| INCLUDED ACCESSORIES: | |
| 1
- finishing kit |
(25 cable ties, 5 stick-on cable tie bases, free 4>3 fan adapter) |
| SHIPPING WEIGHT: 27 lbs | |
|
|
|
POWER SUPPLY OPTIONS:
1. Purchase the SPI350-120 (Forton Source / Sparkle Power no. SP350-60PN) with automatic fan control for $5.00 less than the storefront price when you buy one of the modified cases.
2. Want more power? Get the TT-420SS for $5.00 less, or step up to the Enermax 465FCA and take $5.00 off. Any PS will receive an additional discount when purchased with our cases. Further, it will be installed and/or shipped with the case, as one package, thus saving you shipping expenses.
CUSTOM CONFIGURATIONS: Want a variation on these storefront configurations? Just tell us in the "comments" field in the order, and we'll reply promptly with the adjusted configuration. For more information or special requests, just e-mail-- jfh@coolcases.com
Coolcases Home