|

Compucase LX-6A19
| CCLXA6M2-FKJP |
MODS 1, plus a right
side-mid level 92 punch, trim & grommets; JMC and Panaflo
fans, fan accessories.
RECOMMENDED CONFIGURATION-- |
COMMENTS:
The JMC-Panaflo package is our standard one for the M2 mods
package, and you can get it set up two ways.
With the fans running as 12v, the intake
airflow is about 104 cfm and the exhaust is 92 cfm with a typical
low-speed PSU fan.
With the fans running at 7v, the
intake airflow is about 62 cfm, and the exhaust is about 58
cfm. Besides the benefit of very quiet operation, you get get
a well-dispersed airflow--see the comments below.
Adding the right side-middle intake
fan mount is probably the most important "upgrade"
for increased cooling performance in this case. It provides
for much better airflow, dispersing air throughout the motherboard
area but particularly at the memory- CPU-HS-HS fan area.
The Right-side filter detail varies
slightly, depending on the case color: For the beige cases,
a chrome fan guard is installed on the outside, the metal mesh
filter in installed inside, next to the panel, and another chrome
fan guard is installed on the inside of the fan. For the
black case, a black plastic mesh filter is installed on the
outside.
|
| CASE: |
| 1- LX-A619 - beige or black: |
(case, NO PS, two Global t-c fans, remov. 3.5 cage, 5-HD Rack,
HD rubber mtg. grommets, front filter, front I/O, parts kit)
|
| MODIFICATIONS: |
|
LF: P, D, & T 120 |
(punch lower front 120 grill, drill 120 mtg holes, trim) |
BBd: P, D, & T 120 |
(punch lower front 120 grill, drill 120 mtg holes, trim) |
| RS-M:
P & D 92 |
(punch right-side 90 by
ext 3.5 bys, drill 90 mtg holes, trim) |
2 or 3 - grommet mounts |
(overdrill & install grommets on two fan mounts) |
| POWER SUPPLY |
none |
| FANS: |
| credit
memo factory fans |
remove both factory
fans |
LF: 1-J120L/4 |
(JMC 120x25 spec. low noise, 4-pin @ 12v - 61 cfm, 26 dBA) |
| RS-M:
1-P90L1A/4 |
(Panaflo 90, low speed,
4-pin @ 12v - 43 cfm, 27.7 dBA |
BBd: 1-P120L1A/4 |
(Panaflo 120x38 low speed, 4-pin @ 12v - 69 cfm, 30 dBA) |
| INSTALLED PARTS & ACC'S. |
2 or 3 - grommet sets |
fan mounting grommets,
set of four |
2.5 or 3.5 l.f. - punch trim
|
u-channel punch trim,
per lineal foot |
6 - screw sets |
fan, fan acc. mtg. screws |
| 1
- PMF or MMF90 |
Plastic (black) or
metal mesh filter for right-side 90 intake fan |
| 1
or 2 - FG90 |
fan guard(s), 90
mm - RS-M outside (beige) and inside for RS-M fan |
3 - FG120 |
fan guard, 120 mm -
LF inside, BBd inside & outside |
| INCLUDED ACCESSORIES: |
1 - finishing kit |
(25 cable ties, 5 stick-on cable tie bases, free 4>3 fan
adapter) |
| SHIPPING WEIGHT: 24 lbs |
POWER SUPPLY OPTIONS:
1. Purchase the SPI350-120 (Forton Source /
Sparkle Power no. SP350-60PN) with automatic fan control for $5.00 less
than the storefront price when you buy one of the modified cases.
2. Want more power? Get the TT-420SS
for $5.00 less, or step up to the Enermax 465FCA and take $5.00 off.
Any PS will receive an additional discount when purchased with
our cases. Further, it will be installed and/or shipped with
the case, as one package, thus saving you shipping expenses.
CUSTOM CONFIGURATIONS: Want a
variation on these storefront configurations? Just tell us in
the "comments" field in the order, and we'll reply promptly
with the adjusted configuration. For more information or special
requests, just e-mail-- jfh@coolcases.com
Coolcases Home
|