Compucase LX-6A19
| CCLXA6M2-FKFF-UC | MODS 1, plus a right side-mid level 92 punch, trim & grommets; Enermax UC-12 fans installed in Lower Front and Backboard fan mounts; Enermar UC-9 adj. sp. fan installed in Right Side intake. |
With all three fans, you have 3-speed manual adjustment. The Enermax UC-12s can range from 54 cfm at 26 dBA on up to 94 cfm at 34 dBA; the UC-9 fan ranges from 48 cfm at 26 dBA on up to 64 cfm at 34 dBA. And, all three fans have three-pin connectors, so they'll hook up to the motherboard fan headers--but be sure to check the motherboard fan header power capacity if you plan on running on the "high" settings. Adding the right side-middle intake fan mount is probably the most important "upgrade" for increased cooling performance in this case. It provides for much better airflow, dispersing air throughout the motherboard area but particularly at the memory- CPU-HS-HS fan area. The Right-side filter detail varies slightly, depending on the case color: For the beige cases, a chrome fan guard is installed on the outside, the metal mesh filter in installed inside, next to the panel, and another chrome fan guard is installed on the inside of the fan. For the black case, a black plastic mesh filter is installed on the outside. |
|
| CASE: | |
| 1- LX-A619 - beige or black: | (case, NO PS, two Global t-c fans, remov. 3.5 cage, 5-HD Rack,
HD rubber mtg. grommets, front filter, front I/O, parts kit) |
| MODIFICATIONS: | |
 LF: P, D, & T 120 |
(punch lower front 120 grill, drill 120 mtg holes, trim) |
| BBd: P, D, & T 120 |
(punch lower front 120 grill, drill 120 mtg holes, trim) |
| |
(punch right-side 90 by ext 3.5 bys, drill 90 mtg holes, trim) |
| 2 or 3 - grommet mounts |
(overdrill & install grommets on two fan mounts) |
| POWER SUPPLY | none |
| FANS: | |
| |
remove both factory fans |
| LF: 1-J120L/4 |
(JMC 120x25 spec. low noise, 4-pin @ 12v - 61 cfm, 26 dBA) |
| |
(Panaflo 90, low speed, 4-pin @ 12v - 43 cfm, 27.7 dBA |
| BBd: 1-P120L1A/4 |
(Panaflo 120x38 low speed, 4-pin @ 12v - 69 cfm, 30 dBA) |
| INSTALLED PARTS & ACC'S. | |
| 2 or 3 - grommet sets |
fan mounting grommets, set of four |
| 2.5 or 3.5 l.f. - punch trim
|
u-channel punch trim, per lineal foot |
| 6 - screw sets |
fan, fan acc. mtg. screws |
| |
Plastic (black) or metal mesh filter for right-side 90 intake fan |
| |
fan guard(s), 90 mm - RS-M outside (beige) and inside for RS-M fan |
| 3 - FG120 |
fan guard, 120 mm - LF inside, BBd inside & outside |
| INCLUDED ACCESSORIES: | |
| 1 - finishing kit |
(25 cable ties, 5 stick-on cable tie bases, free 4>3 fan adapter) |
| SHIPPING WEIGHT: 24 lbs | |
COMMENTS:
OK, here's the most complete range of cooling performance available
in a MODs2 package without the extra expense of a fan controller.
POWER SUPPLY OPTIONS:
1. Purchase the SPI350-120 (Forton Source / Sparkle Power no. SP350-60PN) with automatic fan control for $5.00 less than the storefront price when you buy one of the modified cases.
2. Want more power? Get the TT-420SS for $5.00 less, or step up to the Enermax 465FCA and take $5.00 off. Any PS will receive an additional discount when purchased with our cases. Further, it will be installed and/or shipped with the case, as one package, thus saving you shipping expenses.
CUSTOM CONFIGURATIONS: Want a variation on these storefront configurations? Just tell us in the "comments" field in the order, and we'll reply promptly with the adjusted configuration. For more information or special requests, just e-mail-- jfh@coolcases.com
Coolcases Home