| ENL7602-M1-FK0 |
MODS 1 - LF 120, BBd 90, grommet mounts & Intake filter. |
COMMENTS: Here's the starting point: the PS is removed--the factory chassis fan grills are punched out, and the fan mounting holes are drilled and overdrilled for grommet mounting. U-channel polymer trim is installed on the edges of the punches and rubber grommets are installed in the mounting holes, This version is ideal for the buyer who already owns his own PS and fans. We included the longer PH mounting screws you need for grommet mounting your fans, and the intake filter is installed. If you want a standard PS, we'll add the AGI300w back in for $17.00. |
|
| CASE: (updated photo will show filter in lower front 120) | |
| 1- 7602 beige or black: | (case, NO PS, one S90/3 factory backboard fan, parts kit) |
| MODIFICATIONS: | |
 LF:
P, D, & T 120 |
(punch lower front 120 mount, drill 120 mtg holes, trim) |
| BBd:
P, D, & T 90 |
(punch backboard 92 grill, trim) |
| 2
- grommet mounts |
(overdrill & install grommets on two fan mounts) |
| POWER SUPPLY | none |
| FANS: | none |
| INSTALLED PARTS & ACC'S. | |
| 2
- grommet sets |
fan mounting grommets, set of four |
| 2.25
l.f. - punch trim |
u-channel polymer punch trim |
| 1
- XL screw set |
mtg. screws, XL for grommet mounts |
| 1- MMF120 |
metal mesh filter for lower front intake |
| INCLUDED ACCESSORIES: | |
| 1
- screw set |
mtg. screws, XL for grommet mounts |
| 1
- finishing kit |
(25 cable ties, 5 stick-on cable tie bases, 4>3 fan adapter) |
| SHIPPING WEIGHT: 18 lbs | |
SIZE
- 14.5" High by 7.5" Wide by 17" Deep.
DRIVES -
exposed: two - 5.25, one 3.5;
hidden: two 3.5
FAN MOUNTS
- Lower Front: one 80/90, direct mount.
Backboard: one 80/90, direct
mount.
FRONT I/O
- USB 2.0, on left edge of bezel.
Coolcases Home