| ENL7602-M2-FK0 |
MODS 2 - LF 120 intake , LS-F 92 intake, BBd 92 exhaust, grommet mounts & Intake filters. |
| CASE: (Shown here in a temporary picture, with fans installed and with an optional window and handle) | |
COMMENTS: In addition to the LF120 and BBd 90 punches and fan mounts in Mods1, Mods2 adds a 92 punch in the left side-front. This level of mods is designed to provide complete and quiet airflow in a desktop case, with the intake fans at 7v and the exhaust fat at 12v. The airflow is substantial: Using a typical Panaflo 120x38L1A and the Panaflo 92L1A, for the intake fans, there we be about 70 cfm intake, and roughly 67 cfm exhaust, with a typical low speed PS fan.
|
|
| 1- 7602 beige or black: | (case, NO PS, one S90/3 factory backboard fan, parts kit) |
| MODIFICATIONS: | |
 LF:
P, D, & T 120 |
(punch lower front 120 mount, drill mtg holes, trim) |
| LS-F:
P, D, & T 92 |
(punch left side-front 92 mount, drill mtg holes, trim) |
| BBd:
P, D, & T 92 |
(punch backboard 92 grill, trim) |
| 3
- grommet mounts |
(overdrill & install grommets on three fan mounts) |
| POWER SUPPLY | none |
| FANS: | none |
| INSTALLED PARTS & ACC'S. | |
| 3
- grommet sets |
fan mounting grommets, set of four |
| 3.3
l.f. - punch trim |
u-channel polymer punch trim |
| 2
- XL screw set |
mtg. screws, XL for grommet mounts |
| 1- MMF120 | metal mesh filter for lower front intake |
| 1- MMF92 |
metal mesh filter for left side-front intake |
| INCLUDED ACCESSORIES: | |
| 1
- screw set |
mtg. screws, XL for grommet mounts |
| 1
- finishing kit |
(25 cable ties, 5 stick-on cable tie bases, 4>3 fan adapter) |
| SHIPPING WEIGHT: 18 lbs | |
SIZE
- 14.5" High by 7.5" Wide by 17" Deep.
DRIVES -
exposed: two - 5.25, one 3.5;
hidden: two 3.5
FAN MOUNTS
- Lower Front: one 80/90, direct mount.
Backboard: one 80/90, direct
mount.
FRONT I/O
- USB 2.0, on left edge of bezel.
Coolcases Home