| ENL7602-M2W1-FKUC |
MODS 2 - LF 120 intake , LS-F 92 intake, BBd 92 exhaust, BBd-PCI exhaust port, grommet mounts & Intake filters; Enermax UC fans.. |
COMMENTS: In
addition to the LF120 and BBd 90 punches and fan mounts in Mods1,
Mods2 adds a 92 punch in the left side-front, and two 43 mm
ports are punched in the backboard, by the PCI slots. These
new punches are trimmed, and the front 92 punch has grommets
in the mounting holes. This level of mods is designed to provide
complete and quiet airflow in a desktop case, at either 7v or
12v fan power..
With the Enermax adjustable-speed fans installed, the airflow could be substantial. With the intake fans set to low speed--and then they sound like Panaflos, with no motor noise--the intake would be about 100 cfm. The exhaust side would be about 76 cfm or so--and that 'positive pressure' is dissipated through the Backboard PCI port. See the detail below:
|
|
| CASE: | |
| 1- 7602 beige or black: | (case, NO PS, one S90/3 factory backboard fan, parts kit) |
| MODIFICATIONS: | |
 LF:
P, D, & T 120 |
(punch lower front 120 mount, drill mtg holes, trim) |
| LS-F:
P, D, & T 92 |
(punch left side-front 92 mount, drill mtg holes, trim) |
| BBd:
P, D, & T 90 |
(punch backboard 92 grill, trim) |
| BBd-PCI:
P & T 43 |
(punch backboard 43 port, trim, install mesh) |
| 3
- grommet mounts |
(overdrill & install grommets o3 - ge fan mounts) |
| POWER SUPPLY | none |
| FANS: | |
| LF:
1 - UC-12 FAB |
Enermax 120x25 "UC" 3-spd fan--54 to 94 cfm, 26 to 34 dBA |
| LS-F:
1 - UC-9 FAB |
Enermax 92x25 "UC" 3-spd fan--48 to 64 cfm, 24 to 34 dBA |
| BBd:
1 - UC-9 FAB |
Enermax 92x25 "UC" 3-spd fan--48 to 64 cfm, 24 to 34 dBA |
| INSTALLED PARTS & ACC'S. | |
| 3
- grommet sets |
fan mounting grommets, set of four |
| 4.5
l.f. - punch trim |
u-channel polymer punch trim |
| 6
- screw sets |
fan, fan acc. mtg. screws |
| 1 - MMF120 | metal mesh filter for lower front intake |
| 1 - FG120 | fan guard, 120 mm. for lower front inside |
| 1 - MMF92 |
metal mesh filter for left side-front intake |
| 4 - FG92 | fan guard, 92 mm. for left side-front, BBd inside & outside |
| INCLUDED ACCESSORIES: | |
| 1
- finishing kit |
(25 cable ties, 5 stick-on cable tie bases, 4>3 fan adapter) |
| SHIPPING WEIGHT: 24 lbs | |
SIZE
- 14.5" High by 7.5" Wide by 17" Deep.
DRIVES -
exposed: two - 5.25, one 3.5;
hidden: two 3.5
FAN MOUNTS
- Lower Front: one 80/90, direct mount.
Backboard: one 80/90, direct
mount.
FRONT I/O
- USB 2.0, on left edge of bezel.
Coolcases Home